|
|
Feb 26, 2009
Tourist Parks get ‘tick of approval’
All of
Gold Coast City Council’s Tourist Parks have been given the ‘tick of
approval’ by the Caravan, RV and Accommodation Industry of Australia,
(CRVA).
Chair of Council’s Community and Cultural Development Committee, Cr
Bob La Castra, said he was not surprised that Council’s Tourist Parks
had received the coveted Tourism Tick.
“We have some of the best Tourist Parks in country and receiving the
tick of approval from Australia’s peak body for the caravanning
industry confirms this,” said Cr La Castra.
The Tourism Tick is a nationally recognised benchmark of quality
tourism performance and is only awarded to Tourism Parks that have
completed the CRVA’s National Accreditation program.
“Our Tourist Parks where required to develop quality management
systems in the areas such as risk management, environmental management
and customer service,” said Cr La Castra.
“By successfully completing the program our Tourist Parks have not
only improved their levels of service and management, they have also
ensured that these standards continue to improve.”
Posted at 03:45 pm by rinkypeter
Permalink
Jul 22, 2008
Acid rain is rain or any other
form of precipitation which is unusually acidic. It has dangerous effects on
the environment and on structures. It is mostly caused by emissions due to
human activity of sulfur and nitrogen compounds which respond in the atmosphere
to produce acids. In recent years, many governments have introduced laws to lessen
these emissions. Both lower pH and higher aluminum concentration in the surface
water that occur as a result of acid rain can cause damage to fish and other
aquatic animals. At pHs lower than 5 most of the fish eggs would not hatch and
lower pHs can kill adult fish. As lakes become more acidic biodiversity is also
reduced. Soil biology can be critically damaged by acid rain. Some tropical
microbes can quickly consume acids but other microbes are incapable to tolerate
low pHs and are killed. The enzymes of these microbes are denatured by the
acid. The hydronium ions of acid rain also mobilize toxins and filter away
essential nutrients and minerals
Posted at 02:01 pm by rinkypeter
Permalink
Jul 18, 2008
Acid rain is rain or any other
form of precipitation which is unusually acidic. It has dangerous effects on
the environment and on structures. It is mostly caused by emissions due to
human activity of sulfur and nitrogen compounds which respond in the atmosphere
to produce acids. In recent years, many governments have introduced laws to lessen
these emissions. Both lower pH and higher aluminum concentration in the surface
water that occur as a result of acid rain can cause damage to fish and other
aquatic animals. At pHs lower than 5 most of the fish eggs would not hatch and
lower pHs can kill adult fish. As lakes become more acidic biodiversity is also
reduced. Soil biology can be critically damaged by acid rain. Some tropical
microbes can quickly consume acids but other microbes are incapable to tolerate
low pHs and are killed. The enzymes of these microbes are denatured by the
acid. The hydronium ions of acid rain also mobilize toxins and filter away
essential nutrients and minerals
Posted at 01:06 pm by rinkypeter
Permalink
Jul 15, 2008
Gold has been recognized and highly-valued since prehistoric
times. It might have been the first metal used by humans and was valued for
both ornamentation and rituals. Gold is the most malleable and ductile metal; a
single gram could be beaten into a sheet of one square meter, or an ounce into
300 square feet. Gold leaf can be flattened thin enough to become translucent.
The transmitted light appears greenish blue, as gold strongly reflects yellow
and red. It readily forms alloys with many other metals. Gold is an excellent
conductor of heat and electricity, and is not affected by air and most
reagents. Heat, oxygen, moisture, and most corrosive agents have very little
chemical effect on gold, making it very well-suited for use in coins and
jewelry. Pure gold is so soft for ordinary use and is hardened by alloying with
copper or other base metals. The gold content of gold alloys is measured in
carats (k), pure gold being designated as 24k.
Posted at 02:58 pm by rinkypeter
Permalink
Jun 16, 2008
Butterflies are adult flying stage of certain insects
belonging to an order or group called Lepidoptera. Moths also belong to this
group. The word "Lepidoptera" means "scaly wings" in Greek.
This name completely suits the insects in this group because their wings are
covered with thousands of tiny scales overlapping in rows. The scales, which
are arranged in colorful designs unique to every species, are what give the
butterfly its beauty. Like all other insects, butterflies also have six legs
and three main body parts: head, thorax (chest or mid section) and abdomen
(tail end). They also have two antennae and an exoskeleton.
Posted at 05:01 pm by rinkypeter
Permalink
Jun 10, 2008
Hurricane Katrina was the one of the five deadliest
hurricanes in the history of the United States. It was the
sixth-strongest Atlantic hurricane that was ever recorded and the
third-strongest hurricane on record that made landfall in the United States.
Katrina formed on August 23 during the 2005 Atlantic hurricane season and
caused devastation along the north-central Gulf Coast.
The most severe loss of life and property damage occurred in New Orleans, Louisiana,
which flooded as the levee system catastrophically failed; in many cases hours
after the storm had moved inland. In the 2005 Atlantic season, Katrina was the
eleventh tropical storm, fifth hurricane, third major hurricane, and second
Category 5 hurricane.
Posted at 01:35 pm by rinkypeter
Permalink
May 14, 2008
An earthquake is caused by sudden, violent shifting of
massive rocks called plates lying under the earth's surface. This movement of
the plates releases stress that accumulates along geologic faults. A fault is a
deep crack that marks the boundary between two of the plates. Earthquake belts
occur along faults all around the world. Many run along coastal areas. The San Andreas Fault in central California is well-known for causing most
severe earthquakes. The epicenter is the point on the surface where the
earthquake is strongest. The Richter scale is used to measure the amount of
energy that is released by the earthquake.
Posted at 09:58 am by rinkypeter
Permalink
Apr 18, 2008
An
inductor is a passive electrical device working in electrical circuits for its
property of inductance. Inductance is an consequence which results from the
magnetic field that forms around a current carrying conductor. Electrical
current through the conductor creates a magnetic flux relative to the current.
A change in this current creates a change in magnetic flux that, in turn,
generates an electromotive force that acts to oppose this change in current. Inductance
is a calculate of the generated emf for a unit modify in current. An inductor
with an inductance of 1 henry produces an emf of 1 V when the current through
the inductor changes at the rate of 1 ampere per second. The number of turns,
the area of each loop/turn, and what it is wrapped around influence the
inductance.
An inductor opposes changes in the current. An
ideal inductor would offer no resistance to a constant direct current, however,
only superconducting inductors have truly zero electrical resistance. Inductors
are used expansively in analog circuits and signal processing.
Posted at 12:23 am by rinkypeter
Permalink
Mar 14, 2008
Polyester is the most widely used manufactured fiber in the
United States. Natural fiber polyester fabrics are used for attire and home
furnishings. These include bed sheets, bedspreads, curtains and draperies.
Polyester fiberfill is also used to substance pillows, comforters and cushion stuffing.
Polyester fabrics sometimes have a "less natural"
feel when compared to correspondingly woven fabrics made from ordinary fibers,
e.g., cotton. However, polyester fabrics may demonstrate other advantages over
natural fabrics, e.g., improved wrinkle confrontation. As a result, polyester
fibers are often spun mutually with natural fibers, e.g., cotton, to create a
cloth with blended properties.
Polyesters are also used to make bottles, films, oilcloth,
liquid crystal displays, holograms, filters, dielectric film for capacitors,
film insulation for wire and insulating tapes. Liquid crystalline polyesters
are among the first scientifically used liquid crystalline polymers. In general
they have extremely good perfunctory properties and are exceptionally heat defiant.
For that reason, they can be used as an abradable seal in jet engines.
Thermosetting polyester resins are normally copolymers of
unsaturated polyesters with styrene. The unsaturation in the polyester is generally
governed by maleic acid or fumaric acid. Another important family is the group
of vinyl esters. Here the unsaturation is found in the alcohol part of the
polyester. The double bond of the unsaturated polyester reacts with styrene
resulting in a 3-D crosslinked structure, the thermoset fabric. The
cross-linking is initiated through an exothermic reaction involving an organic
peroxide, such as methyl ethyl ketone peroxide or benzoyl peroxide. Unsaturated
polyesters are commonly used as casting materials, fiberglass laminating
resins, and non-metallic auto-body fillers. Fiberglass reinforced unsaturated
polyesters find wide application in bodies of yachts and as body parts of cars.
Posted at 09:15 pm by rinkypeter
Permalink
Mar 13, 2008
Temperature is a physical assets of a system that underlies the common notions of hot and cold; something that is hotter generally has the greater temperature. Specifically, temperature is a property of substance. Temperature is one of the major parameters of thermodynamics. On the microscopic scale, temperature is defined as the average energy of microscopic motions of a single atom in the system per degree of freedom. On the macroscopic scale, temperature is the exclusive physical property that determines the direction of heat flow between two objects placed in thermal contact. If no heat flow occurs, the two objects have the same temperature; otherwise heat flows from the hotter object to the colder object. These two basic principles are stated in the zeroth law and second law of thermodynamics, respectively. For a solid, these microscopic motions are principally the vibrations of its atoms about their sites in the firm. For an idyllic monatomic gas, the microscopic motions are the translational motions of the component gas particles.
Temperature is measured with thermometers that may be calibrated to a range of temperature scales. In most of the world (except for the United States, Jamaica, and a few other countries), the degree Celsius scale is used for most warmth measuring purposes. The entire scientific world measures temperature using the Celsius scale and thermodynamic temperature using the kelvin scale, which is just the Celsius scale shifted downwards so that 0 K[1]= −273.15 C, or absolute zero. Many engineering fields in the U.S., especially high-tech ones, also use the kelvin and degrees Celsius scales. However, the United States is the last major country in which the degree Fahrenheit temperature scale is used by most lay people, industry, popular meteorology, and government. Other engineering fields in the U.S. also rely upon the Rankine scale when working in thermodynamic-related disciplines such as incineration.
Posted at 11:28 pm by rinkypeter
Permalink
|
|
|